The right choice of roofing material is a matter of increased importance. It is relevant for both roofs and balconies, since it also requires the provision of a proper level of protection against moisture. Specialists usually recommend the use of brands H or HC for these purposes. Best option for balcony - This is NS-35, which on the one hand is a very practical material, and on the other it boasts a reasonable price (less than 400 rubles per sheet).
The installation of metal elements on the balcony is easy to do on their own, but many people are afraid to do such a job because of the presence of apparent difficulties. In fact, problems should not arise, especially if you follow the procedure below.
The main stages of installation of the roof of the balcony
- It is necessary to prepare the foundation. Usually, this is a farm from a metal corner and planks. The distance between the supporting elements here is not more than one meter. Installation of the entire structure is completed by fixing it to the wall. This procedure is carried out using anchors, the latter must enter the wall by at least 8 cm.
- Create crate from timber. If you plan to get a durable construction, then it is advisable to treat the beam itself with antiseptics. This will get rid of unwanted insect guests and prevent rotting of the tree if moisture does get on it. It is better to work with such impregnations outdoors, since they are not very useful for health in the form of solutions.
- Cutting a profiled sheet. It is made with metal scissors. Sheets need to be fastened using self-tapping screws, and those whose heads have a waterproofing layer.
- It is necessary to fix the corrugated board. After this operation, cracks and cracks are filled with foam. From the outside, it is better to use a cement mortar or sealant.
- For those balconies that are planned to be glazed, mount an additional beamlocated along the perimeter of the roof.
- To insulate the roof You can use mineral wool, but between it and the roofing material it is better to lay membrane insulation.
Obviously, all the work on creating a roof over your balcony can be done by yourself.
The only thing to be warned about is this is foam, which should not be too much, and you don’t need to cut off the protruding bubbles after they dry. This will lead to a decrease in the operational characteristics of the interlayer.
Video: the consequences of poor-quality roof installation
When performing installation work, remember that everything must be done “in good faith”. Otherwise, you may encounter many problems. The following video is direct evidence of this.
Alas, no comments yet. Be the first!