Overview of the characteristics of the roofing material Andalusia and installation recommendations


One of the most profitable roofing materials is Andalusia metal tile. Its appearance imitates the coating of natural clay tiles. Definitely, it is not so difficult to notice the difference, but this does not reduce the other positive characteristics of this metal tile.

Advantages of Andalusia Metal Roofing

Roof covered with metal Andalusia
Roof covered with metal Andalusia

Metal tile Andalusia has very advantageous characteristics, compared to other roofing materials:
Concealed fixtures are positioned in such a way that finding them is not so easy. The bottom line is that roofing sheets are made with a z-shaped lock, so you can do without external fasteners.
The attractiveness of the surface due to the high symmetrical wave, which gives the roof an even greater similarity to natural tiles.
The strength of the tiles is quite high (due to the high profile wave).
The structured edge of the sheet cut is made in such a way that the joint between the upper and lower sheets is completely invisible.
The small sheet size and weight of the Andalusia metal tile allows for quick installation of the roof.
Saving on transportation and installation is possible due to the fact that delivery can be carried out by car and does not require additional components, such as self-tapping screws in color.
This metal tile is produced on modern, high-tech equipment made of galvanized steel. In order to give the roof a more attractive appearance and high resistance to corrosion, it is covered with polymer coatings.

Available colors

The color scheme for painting
The color scheme for painting

The colors of the metal tile of Andalusia are very diverse. In the basic version, about 40 shades are presented. This allows you to purchase a metal roof of Andalusia for any design decision.

The lineup

On the construction market, metal tile Andalusia is represented by the following model range:

  • Monterrey
  • Andalusia One-step Suite;
  • Andalusia
  • Andalusia Suite two-step.

Most Important Specifications

Metal tile Andalusia specifications:
The thickness of the sheet varies depending on the type of protective coating, from 0.4 to 0.6 cm.
The height of the step is 2.5 cm.
Step pitch –40 mm.
Working width - 1m 16 cm.
Installation width - 1m.
Length - at the buyer's choice, from 0.5 to 6 m.
Metal tile Andalusia weight 1m? - 5.15kg.
What coating options are there?
Andalusia metal tile is covered with one of the following materials:

  • polyester (smooth surface);
  • Pural (smooth surface);
  • matte polyester (matte surface);
  • plastisols (embossed surface).

Installation tips - where to start and how to end

Before you begin roofing, you need to make sure the geometry of the roof is correctly calculated. This is necessary so that in case of inaccuracies, to refine them using additional elements of the roof.

Lower levels of valleys, additional support boards, lower aprons for pipes, must be installed before installation works.
In the case when it is planned to install the drain, the cornice and gutters on the hooks are installed in advance.
How to cut the metal tile of Andalusia - does not matter much.But we draw your attention to the fact that the manufacturer does not recommend carrying out sawing work with a grinder. The reason is that in the case of sawing a metal roof with a grinder, the edge where the cut passes is destroyed. Protective coatings lose their properties. This could lead to rust or corrosion.
Note!

We advise you that the shavings that form during cutting must be removed immediately. It can damage the top layer of tiles.

Installation of metal
Installation of metal

If during roofing, a scratch has formed on the sheet of metal for any reason, it must immediately be painted over with paint in a suitable tone. Otherwise, dampness may get in and corrosion will form.
When building a crate for the metal tile of Andalusia, it is necessary to place the rafters at a distance of at least 60 cm and not more than 1 meter.
The waterproofing is laid on the rafters, without tension, and is nailed with bars, for reliability.

Production of metal tiles Andalusia

The modern equipment is so advanced that now it is possible to manufacture Andalusia metal tiles with hidden fastener systems.
The production process takes place in several stages:

  • metal rolling;
  • application of protective coatings and polymer;
  • profiling;
  • packaging material.
Production of metal tiles Andalusia
Production of metal tiles Andalusia

Too large tolerances for the thickness of the sheet of galvanized steel play a negative role in the production of Andalusia roofing. It is necessary to pay attention to the integrity of the material, especially the protective roofing. There should be no cracks, chips, roughness and abrasions. Even the smallest scratch can subsequently lead to significant losses.
You should also check the thickness of the entire sheet, it is necessary that it is the same at all points. Otherwise, in places of elevation difference, paint may drip off, the shade of the coating may change. For a material such as metal andalusia, the dimensions of the sheet must also correspond to those declared by the manufacturer, 1116 by 751 mm.

Tips for maintenance and operation

Care for metal tiles is the mandatory cleaning of the roof from shavings, dirt, construction debris, after the completion of roofing. Also, as mentioned earlier, with the formation of chips or scratches, damaged areas must be painted. Periodically, it is necessary to conduct a visual inspection of the roof and drainage system for mechanical and other damage. If they are detected, corrective action must be taken. Otherwise, damage poses a potential threat to the entire roofing system. Note!

If it is necessary to store the metal tile for some time on the street, the metal sheets should be divided (laid) with wooden slats. It is also advisable to install bundles with a slope, since the ingress of moisture should not accumulate, it must be drained.

Manufacturers guarantee that if all the operating rules are observed, the service life of the Andalusian metal tile will be at least 30 years.

In conclusion, it should be noted that the metal tile of Andalusia has high indicators of quality and reliability. There is no doubt that this roofing material will last without complaints for more than a dozen years. In addition, the manufacturer offers a wide color spectrum, so it will not be difficult to choose the most suitable option.

roof.designuspro.com/en/

Alas, no comments yet. Be the first!

Add a comment

Data was not disclosed

Materials

Roof safety

Roof mounting