Do it yourself! Unique self-made concrete hanger

Even a novice can make a unique hanger. To do this, you need to show a little imagination and prepare the necessary materials. The result will amaze all expectations, and the product will turn out original and unusual.

note!

The shape of the hanger can be anything. It all depends on desire and imagination.

Own hanger

If you want to make a hanger, you have to try a little. The manufacturing process is not complicated. On the contrary, the master class will bring a lot of pleasure, and will help to spend time with benefit.

Materials:

  • jigsaw;
  • plastic bottle;
  • water;
  • threaded brass insert;
  • knife;
  • cardboard;
  • nut;
  • alginate;
  • ruler;
  • quick-drying concrete mix;
  • sandpaper;
  • brush;
  • washer;
  • bolt;
  • dowels;
  • pencil;
  • board;
  • self-tapping screws;
  • screwdriver;
  • drill.

Execution Sequence:

  • We take a bottle, cut off the top. Put your hand in the resulting glass, and check how free it fits.
  • We mix alginate and water in a plastic container in a ratio of 1 to 1.5.
  • Let the mass stand for a while. Then we put our hand in the mixture, we can clench a fist or spread our fingers.
  • Keep your hand in the container for 10 minutes, carefully pull it out.
  • We attach a bolt to the cardboard.
  • Mix concrete and water separately. At the same time, we observe the proportions recommended by the manufacturer.
  • Pour concrete into the mold, place cardboard on top. The bolt is completely immersed in the mass.
  • Allow the workpiece to freeze. Cut the bottle, remove the alginate.
  • We rinse the product under water. For convenience, we can use a brush with a sponge.
  • We process all irregularities with sandpaper. We fill the places where air bubbles appeared with concrete.
  • We take a board, with a jigsaw we cut out the base for the finished product. It is best if it will have a round shape. If the jigsaw is not at hand, we can use a saw.
  • Sand the edges of the base. We will prepare a pencil and a ruler, with the help of tools we make the marking for the hole.
  • In the central part of the workpiece we make a hole. Insert the nut that is glued on the outside.
  • We insert the base of wood into the hand of concrete. The bolt will protrude slightly from the back, we carefully cut it off.
  • We twist the arm, attach the workpiece to the wall. For this we use dowels, screws, a drill.
  • At the final stage, we insert a hand of concrete into the workpiece.

The hanger is ready, it remains only to evaluate the work. Such a product will not go unnoticed. It can be used to store keys, scarves.

note!

To make the hanger neat, it must be cleaned of alginate residues, sanded.

If you want to fill the house with unique things, do not give up the idea. In addition, there are a lot of options for this. Why not make a hanger in the shape of your own hand with your own hands - such a composition will perfectly fit into the interior and become a real decoration in the house. Invited guests will not be able to pass by such a product, they will be delighted with the creativity of the owners.

roof.designuspro.com/en/

Alas, no comments yet. Be the first!

Add a comment

Data was not disclosed

Materials

Roof safety

Roof mounting