Installation of suspended ceiling made of plastic panels

The ceiling made of plastic panels is one of the most common types of horizontal ceilings. The material is easy to install and meets operational requirements.

Plastic Panel Ceiling

Environmentally friendly plastic looks organically in different interiors, its scope is quite extensive.

Plastic trim

Plastic ceiling panels are used for hanging in the corridor, kitchen, bathroom, toilet, they are used on balconies and loggias not only for horizontal, but also for decoration of wall surfaces. For coating in bedrooms and halls, material is rarely used because of simplicity, from the point of view of designers.

The hinged ceiling is a seamless plane, which is drawn from separate strips. You can assemble the elements into the structure by connecting them together using a protruding groove and a cavity, which are located along the entire length of the panel and snap into place when pressed.

Any owner can make a plastic ceiling with his own hands, while he will need the help of a partner.

Material popularity

False ceilings of any kind visually hide the disadvantages of the ceiling. At the same time, preliminary leveling of the surface is not required, which saves money and time.

There are positive points when installing a ceiling made of plastic panels:

DIY wall panel ceiling

  • wires to electrical points on the ceiling pass between the decorative coating and the floor slab, so installation of ducts or cutting a furrow in a reinforced concrete slab is not required before making a plastic ceiling;
  • when mounting the frame under the panel, sound and thermal insulation of the room is simultaneously made;
  • visual solidity does not interfere with the ventilation and ventilation of the space behind the plastic, so mold does not develop;
  • environmentally friendly material does not emit harmful substances into the environment, fungi and microbes do not live in it;
  • the service life is from 20 to 40 years without deformation and burnout;
  • it is easily cleared of pollution by improvised detergents.

Reasons for rejecting panels

Material refers to budget finish, looks beautiful on the surface, but designers avoid PVC panels when developing projects for luxury homes and cottages. Some inexpensive types of material after mounting to the ceiling transmit light from the lamps that are placed inside the structure. This leads to visual viewing of the shadows of the frame and the rail against the background of the surface.

Budget types of PVC panels do not create a seamless coating due to poor joining of the sides. A multi-tiered construction of plastic on the ceiling is not done, as it is technologically impossible or very difficult.

The choice of PVC strips

Panels that are thinner can be installed on the ceiling, since they are not subjected to stress and pressure, such as wall trim elements. But thin strips are visible, therefore more powerful plastic is used, if funds allow. For thin PVC even a cork from champagne is dangerous, which shoots up.

DIY plastic ceiling

Plastic goes on sale 6 meter stripesthat are cut in half for easy transportation. The width of the panels is 10, 15, 20 and 25 cm, there is a wider material, but this is often ordered in advance.

From wide strips it is possible to assemble an impeccable ceiling covering over large areas, but for small apartments narrow plastic is chosen, which is used more economically.

The color of modern PVC material is very diverse.

Imitation of stone, marble, wood species is applied to the surface. Light-colored plastic is installed on the ceiling, and dark over time bothers and creates an oppressive impression. The following technologies are used to cover the strips:

  • lamination;
  • varnishing;
  • matting;
  • glossy layer.

Installation procedure

The preparation includes marking on the walls of the lines for lowering the ceiling using the building level. Along this line passes the UD profile, which is mounted around the perimeter of the room. The lowest point of the ceiling is taken as the starting point. For fastening the strapping profile, dowels are used, which are located after 40 cm.

Plastic ceiling panels

Lines are marked on the ceiling, along these rails brackets are fastened for fixing the main CD profile.

The ends of the bearing part are led into the wall piping and fastened with self-tapping screws for working on metal. The main runs are also fixed to brackets with similar hardware.

It is important to maintain a strict horizontal structure, therefore, use the level during installation.

First, the starting strip is fastened, which is located around the perimeter of the room. The plastic strips are cut to size, their ends are inserted into the starting profile, and the body is attached to the supporting profiles with self-tapping screws. During installation, it is necessary to carefully connect the seams of the panels so that gaps do not form. This is done with the help of a helper.

Quality checking

When buying, a visual inspection is carried out, attention is drawn to surface integrity and dimensional accuracy. On the front surface, the manifestation of internal rigid ribs in the form of protruding strips is not allowed. The seller, at the request, joins 2 trimming of the selected material in a horizontal position to check the seam connection and the absence of clearance.

roof.designuspro.com/en/

Alas, no comments yet. Be the first!

Add a comment

Data was not disclosed

Materials

Roof safety

Roof mounting