According to the experienced electrician Sergei Mikhailov, the socket falls out of the wall for several reasons. Most often, fasteners are loosened, an electrical element is incorrectly installed, and so on. Therefore, you need to understand at the first stage why all this happens, and then decide which way is the easiest way to fix the problem.
The outlet falls out of the wall - how to attach it in place
There are several proven ways to install the outlet in place, but it is better to call an electrician. If this is possible, the advice of an experienced electrician Sergei Mikhailov will help you.
Read more: How to wash a toilet bowl from yellowness and rust very easily and effortlessly
If it is not possible to drill new holes, then you can fill the old with hot-melt adhesive. After it dries, you can safely make new holes for fasteners.
The mounting of the undergrowth has loosened - the most common problem. In this case, you need to completely disassemble the socket, drill new holes and fix the socket.
The peculiarity of the work is that very often you have to transfer the socket to another place due to the fact that the mounting holes in the wall become inappropriate sizes.
Read more:Easily and quickly clean the “pockets” of the washer
You can fix the outlet with tape. But this is a temporary solution.
What to do if the frame mount is loose? Most often, these elements are installed on special latches, so if one breaks off, then the frame will no longer hold.
It can also be fixed with a glue gun or holes can be made for screws. Adhesive tape may also come to the rescue. Only it will look not very aesthetically pleasing, but reliable.
Read more:5 products that can trigger oncology
And if the outlet is not attached to the socket? Yes, there are models of electrical devices that are installed on mounting antennae. These are spacers used for fixing. When pulling out sockets, they can also become loose.
In this case, you can only attach the electrical network connector in place with the new mount. The problem most often is that the antennae is loose. Sometimes it’s enough to just pull them up.
Read more:An experienced plumber eliminates blockage with detergent. How?
Before starting work, do not forget to turn off the power supply at the switchboard.
A power outlet is a complex electrical component, the repair of which must be trusted by specialists in order not to create fire hazard situations. It is recommended to buy sockets that are attached to the wall with special screws. Such models are as reliable as possible.
Alas, no comments yet. Be the first!