Material aquaizole and mineral wool Tekhnoruf B60

Aquaizol is a modern roofing materials based on bitumen. Available in the form of a rolled roofing material. The material is either attached to a concrete base, or deposited on an external heat-insulating layer. You have just such a situation and mineral wool Tekhnoruf B 60 acts as thermal insulation. If you use Aquaizol rolled, then you need to fuse the roof in two layers. And don't be afraid to use a gas burner. Mineral wool in no case will suffer - it is fireproof and can withstand high temperatures. Also, this insulation has high heat-insulating and noise absorbing properties.

The most difficult process when installing a roll roof is the abutment of the roll roof. It is performed either with an overlap or in a fork. This is how to lay a roll roof at the junction of the roof to the wall. The lap material lays on the wall, and on top of the adjoining material, all this is attached to the wooden plank. And with the method in the plug, both the abutment material and the roofing sheet are mounted on a wooden plank and closed with a metal apron.

Roll materials are deposited on the roof surface either partially or completely. When partially surfacing, the appearance of air bubbles is excluded in the work, but it is very difficult to find a leak during repair.

The number of layers of material depends on the angle of inclination - the more degrees the angle of inclination, the more layers. As a rule, the lower part of the roof is fused.

When applying the following layers of material, they must be applied so that the joints do not coincide with the joints of the previous layer.

If you suddenly find a place somewhere where the material has not fixed on the base, gently pry off the canvas with a spatula (try not to touch the mineral wool), heat the canvas with a heating pad on the back side and fix it on the surface.