Home-made machines and accessories for the home workshop

Each owner of the workshop tries to equip it with absolutely everything important for convenient, efficient and, most importantly, high-quality work. Here you will need a lot of power tools, a variety of functional machines, and in addition, accessories. That's just a fixture in our time is not cheap. The main difficulty is that not everyone has the opportunity to afford high-quality products. Home-made machines and appliances for the home workshop are no worse than professional ones and at the same time do not require large expenses.

Home-made machines and accessories for the home workshop

Fixed drill

Fixed drill

It is not always possible to drill a clear hole using a hand drill. If necessary, use a fixed drilling machine. This, of course, is accurate and reliable, and is necessary when processing solid elements, in particular a large-diameter drill. It is not often possible to meet such a car in a garage or workshop, mainly because of the price, it is expensive, besides it takes up a lot of space and is rarely used. The lightweight do-it-yourself design is identical to an industrial appliance.

A home-made drill-based machine guarantees the highest reliability of drilling in different circumstances. It is installed on the worktop or on the floor. The structure consists of many components.

The key are the base and the column. The first part is responsible for the stability of the unit mounted on a smooth plane. The second, in turn, makes it possible to gradually and clearly move the drill up and down during drilling. The iron column does not deform even under tremendous pressure and can guarantee drilling vertically. It is worth noting the safety of work.

Drill Based Machine

If the mechanism is firmly fixed in a vise on the table, there will be no risk of injury during drilling. A drill-based machine guarantees an unmistakable hole diameter in parts with complex configurations such as a circle, oval and 90 degree angle. Without this, a home specialist can not do. For the production of bench-top drilling machine based on a drill, you can use finished racks or tripods.

A bench for vertical drilling is useful where there is a need to perform drilling operations when repairing metal structures, wood elements. Equipment made of high-quality materials guarantees stability and reliability of fastening, so the quality of work will be excellent.

Machine for wood

Using an electric drill as an electric drive, you can assemble a homemade product for a car garage. In addition to home-made drilling equipment, in the workshop of the house you can make a woodworking machine with your own hands. A joiner can be created in a few days from boards and screws.

Drawings of home-made machines and devices can be made, but it is allowed to do without them, then it is necessary to carry out the following:

Machine for wood

  1. The creation of home-made devices begins with the search for a suitable board for the base, in which a spindle part with a hole for a drill is installed.
  2. Then create the back. To do this, strengthen the stand to the main part of the strap, which will move along the frame.
  3. In the rack, it is necessary to make the bearing housing. Turn the center of the bolt depending on the diameter of the inner ring.
  4. The back has a socket, and in the frame there is a latch into which it fits and is fixed with a nut. The trident is clamped into the chuck of the drilling machine, in which a part is attached from one end.

Special bed

The Bulgarian, like the electric drill, quickly entered the life of a home specialist and took the position of a multi-purpose device. It can be used for cutting pipes, sheets, stone and tile, it is polished and ground. The equipment is widely used for repairing car bodies. For convenience, it is allowed to make fixtures for the home workshop with your own hands:

Work grinder

  1. In order to make the device more economical and easier, you can take a tree. As with every stationary device, 400 x 400 x 20 mm boards can be part of the active area.
  2. At the bottom of the plate with the help of screws you need to attach the legs in the form of 2 strips 40 x 40 millimeters.
  3. Attach a 100 x 50 mm wide portion to the plate.
  4. Attach a door hinge with a long plate to the plank with screws.
  5. The grinder must be fitted to the stove with a clamp.

The tool for the home workshop, acting as a cutting machine, is ready. For safe operation, a vise should be installed.

Sharpened for own garage

Grinding machine, sharpener - that’s the name of the mechanism, without which neither a workshop, nor a private car garage, nor a car service can do. Such products are necessary devices for car repair, the manufacture of metal objects, sharpening the device, grinding the iron plane.

You do not need to purchase this mechanism, it can be done independently on the basis of an electric drill:

Sharpened for own garage

  1. First you need to find a place on the table and fix the power drill with the support of two wood fasteners 40 mm wide and 2 screws.
  2. In order to install the mechanism, it is necessary to produce a handyman. For this, it is allowed to use thick plywood with a width of 20 mm.
  3. The pen support is mounted on the table, the mechanism moves when connected.

In order for the chips to fall freely onto the floor, you can use emery discs of various diameters at the tip and designate a rectangular hole, the width of which is slightly greater than the thickness of the grinding device. To adjust the armrest to a different height, it is necessary to determine the set of plywood boards and fix them with screws. The upper surface of the tip is covered with a metal plate.

Everything, a useful mechanism for the home workshop is ready for use.

roof.designuspro.com/en/

Alas, no comments yet. Be the first!

Add a comment

Data was not disclosed

Materials

Roof safety

Roof mounting